Omega B
|
Bulkhead
In production, the bulkhead assembly and the instrument panel assembly are installed precisely in the body as one unit. The bulkhead is cemented to the body with PU cement.
In case of severe damage, formation of fractures, splitting of the cement or fire damage, the bulkhead must be completely replaced in assembly Reworking of cement and partial replacement of the bulkhead are not permitted.
1 Remove bulkhead 2 Cement bulkhead with 2 - C screen cement set 2.1 Cement duct (bulkhead, lower; wheel housing) 2.2 Bolt (positioning and fastening) 2.3 Cement application in door pillar area 2.4 Cement bead in door pillar area
|
|
