No.
|
Remedy
|
1
|
Fasten front seat to vehicle
floor with 4 new bolts.
|
2
|
Remove front seat and bolt firmly
to seat console.
|
3
|
Remove panelling from front seat.
Check seat adjustment switch and seat panelling for material damage. Replace
defective parts. Fasten switch in such a manner that all switch functions can
be performed without jamming when panelling is installed.
|
4
|
Remove front seat. Clean lower
and upper seat console rails and regrease. Before installing seat, check that
upper and lower rails can slide smoothly.
|
5
|
Remove front seat. Check drive
mechanism for dirt, jammed foreign bodies and material faults. Replace defective
parts. Check that motor is firmly seated and check function of transfer pipe.
If drive mechanism is okay, replace motor.
|
6
|
Remove front seat. Disassemble
seat console and re-assemble as specified in Service Instructions. Always
make sure that the upper and lower rails are flush on top of one another.
|
7
|
Remove front seat. Check that
anti-submarining switch is firmly seated. Examine mechanism for actuation of
the switch for material faults and check function. Using multimeter
(ohmmeter), check electric switchover function. Replace defective parts.
|
8
|
Remove front seat. Check motor,
flexible cable, gears and fastening parts in front seat backrest for firm
seating and material faults. Replace defective parts. Check drive mechanism
for easy movement. If drive mechanism is okay, replace motor.
|
9
|
Remove front seat. Check assembly
of motor, flexible cable and gears, and also assembly of front seat backrest,
front seat backrest panelling and upholstery as described in Service
Instructions.
|
10
|
Move front seat forwards or
backwards with emergency crank until relevant front seat fastening bolts can
be loosened.
|