Perform safety precautions to prevent sparking and fire hazard
when welding.
Unscrew detent screw and weld spacer plate to old fastening
point. The square hole in the spacer plate must lie congruent with
square hole in reinforcement.
Grind spot weld flat. Seal spot weld and bore with corrosion
protection.
Cement bore with galvanised plate (50 x 50 x 1 mm) (Adhesive 90
295 281 / 15 04 803) and secure with aluminium blind rivets
(Ø 5.2 mm) with flush head (Ø 10 mm), then apply
underseal.
Install front seat.
|