Cables with Rear Guide, Standard Adjustment
Caution
Adjustment of the cables with rear guide must also be performed
if there is a malfunction!
Remove
Glass cover see operation "Glass Cover, Remove and Install",
water gutter – see operation "Water Gutter, Remove and
Install", motor (gears, control unit) – see operation "Motor
(Gears, Control Unit), Remove and Install".
Adjust
Push slide block guide assembly forwards to stop (1) Push rear
guide (2), until pin (4) of guide is between marks (3) on slide
– represents closed position.
|
|
Install
Water gutter, motor (gears, control unit), cover (glass).
Adjust
Glass cover, motor (gears, control unit) – see operation
"Motor Adjustment (Gears, Control Unit)".
|