vauxhall Workshop Repair Guides

Vauxhall Workshop Manuals

< PREV PAGE NEXT PAGE >

Replace service connection valve - air conditioning charged

  Remove

1.   Open bonnet
2.   Detach service connection cap
•   See "Position of Service Connections - Petrol Engines" and "Position of Service Connections - Diesel Engines"
Note:   It is only possible to replace the valve on the low pressure side with the system charged
3.   Prepare valve core replacement tool
•   Attach tool for unscrewing and removing valve )1)
•   Attach sealing cap (2)
Object Number: 2413552  Size: DEFAULT


4.   Connect valve core replacement tool to service connection
5.   Open shut-off valve (1) fully
6.   Push in valve unscrewing and removing tool (2) in the direction of the arrow and unscrew and remove valve
Object Number: 2413553  Size: DEFAULT


7.   Draw out valve unscrewing and removing tool (1) and close shut-off valve (2) completely
8.   Detach valve unscrewing and removing tool (1) from valve core replacement tool
Object Number: 2413554  Size: DEFAULT


  Install

9.   Remove old valve core (1) from valve unscrewing and removing tool and insert new valve core
Object Number: 2413555  Size: DEFAULT


10.   Attach valve unscrewing and removing tool to valve core replacement tool
11.   Turn shut-off valve to open it completely
12.   Push in valve unscrewing and removing tool and screw in valve
13.   Open filler aperture (1)
•   Check valve for leaks
Object Number: 2413556  Size: DEFAULT


14.   Detach valve core replacement tool from service connection
15.   Attach service connection cap
16.   Close bonnet

Related Literature Units
-
-

D Heating, Ventilation, Air Conditioning (HVAC) > Repair Instructions > Replace service connection valve - air conditioning charged

< PREV PAGE NEXT PAGE >