vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

F0:Data List - Test Step 02 REAR WHL SPEEDS > < Explanation of TECH 1 Display

F0: Data List

 

 

No.

TECH 1 Display

Conditions for Checking

Nominal Value

Trouble Codes

Terminal

01

FRONT WHL SPEEDS

Ignition ON

With vehicle jacked up, slowly turn front left / front right wheel by hand

 

 

approx. 5.0 km / h

(3.0 MPH)

25, 39, 41, 42, 43

8, 10, 12, 20

 

 

or

drive vehicle

or

TECH 1 display approx. the same as speedometer display

 

 

 

Notes for Trouble - shooting:

Nominal Value:

Cause of Fault:

 

 

 

 

 

 

 

 

·   Gap between wheel speed sensor and ring gear (pulse pick - up) too large

     Nominal value: 0.2 to 1.5 mm / 0.008 to 0.06 in.

·   Wheel speed sensor (or bracket) loose

·   Ring gear (pulse pick - up) damaged

     Nominal value: 48 teeth

·   Transfer resistance to ground at plug connection X 2P

 

·   See test step 03, 04

 

 

 

 

 

 


Related Literature Units
-F0:Data List - Test Step 03 FL WHEEL SPEED
-
-
-
-
-
-

F0:Data List - Test Step 02 REAR WHL SPEEDS > < Explanation of TECH 1 Display