Vauxhall Workshop Service and Repair Manuals

No.

TECH 1 Display

Conditions for Checking

Nominal Value

Trouble Codes

Terminal

19

CONTROLLED TC

X 25 XE and X 30 XE only:

If torque control is not selected

- - - steps

14

Notes for Trouble - shooting:

Nominal Value:

Cause of Fault:

·   Disconnect ABS - 2SH control unit U 4.8, Motronic M 2.8.1 control unit K 61 and AT control unit K 85 (if present) from wiring harness

·   Using multimeter, check from ABS - 2SH control unit plug U 4.8 / X 25P / Ter. 14 to

     - Motronic M 2.8.1 control unit K 61 / Ter. 38

     - AT control unit K 85 / Ter. 9 (if present)

          for passage

approx. 0 W

·   Plug connection X 1 / Ter. 54 defective

·   Short circuit or lead interruption from ABS - 2SH control unit U 4.8 / X 25P / Ter. 14 to

     - Motronic M 2.8.1 control unit K 61 / Ter. 38

     - AT control unit K 85 / Ter. 9

       (if present)

·   AT control unit K 85 defective

     (if present)

·   Motronic M 2.8.1 control unit K 61 defective

·   Control unit U 4.8 defective