|
Accelerate vehicle only slightly
over 20 km/h (12.5 mph).
After reaching the speed, shift
transmission into neutral position and let vehicle coast down, do not apply
brake.
When coasting down, the parking
brake can be applied slightly to reduce stopping time.
When the vehicle is stationary
apply brake.
Note:
During the wheel speed sensor
test, the four wheel speed values are continuously compared with each other.
The wheel speed values give information about the sensitivity of each sensor.
When the vehicle is stationary,
four values are displayed all of which must be higher than 0 km/h
(0 mph) and lower than 5 km/h (3 mph). It is important that
the wheel speed sensor test is carried out driving on a straight line.
If one value is not inside the
tolerance given, carry out trouble - shooting in the F0: DATA LIST according to test steps 01
and 02.
|
