Vauxhall Workshop Service and Repair Manuals

  Remove

Remove front wheel.

Carefully lever wear indicator sensor out of brake pad. Unclip wiring harness and wiring harness plug for wear indicator sensor from brackets on spring strut and wheel housing.

Disconnect wiring harness plug for wear indicator sensor.

Note:   The wear indicator sensor must be replaced if the sensor housing or wiring harness are damaged.

  Install

Insert wear indicator sensor in inner brake pad.

Attach wear indicator sensor wiring harness to wheel housing, clip wiring harness plug and wiring harness into brackets.

Attach front wheel – 110 Nm / 81 lbf. ft.