vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

F2: TROUBLE CODES - Trouble Code 15 COOLANT TEMP. VOLTAGE HIGH > < F0: DATA LIST - Test Step 12 COOLANT LEVEL ST

Motronic M 1.5.4    F2: TROUBLE CODE TABLE

 

Trouble Code

Information Sensor

Cause of Fault

Remedy in

F0: DATA LIST

No.

Trouble Code Storage when...

14

COOLANT TEMP.

VOLTAGE LOW

06

·   Coolant temperature greater than 140 °C / 284 °F

     (Short circuit to ground)

 

Replacement values:

·   101 °C / 214 °F if intake air temperature greater than 0.4 °C / 32.7 °F

·   Intake air temperature lower than 0.4 °C / 32.7 °F: for 3 min after engine start, the intake air temperature is taken as the replacement value, and thereafter 101 °C / 214 °F again

 

Effects:

·   In general, the learn functions (oxygen sensor control, idle speed control and knock control) are blocked and the last valid values are used for calculation.

 

 

 

 


Related Literature Units
-F0: DATA LIST - Test Step 06 COOLANT TEMP.

F2: TROUBLE CODES - Trouble Code 15 COOLANT TEMP. VOLTAGE HIGH > < F0: DATA LIST - Test Step 12 COOLANT LEVEL ST