|
Remove compressor – see operation "Compressor, Remove and
Install 25 DT, X 25 DT" in group "D".
Detach ribbed V-belt tension roller (3) from AC compressor
support.
Remove AC compressor main bracket attachment screws (1) and
(2).
Remove AC compressor main bracket.
Install
Install AC compressor main bracket – tightening torque 23
Nm / 17 lbf. ft.
Attach ribbed V-belt tension roller hand tight to AC compressor
support – it must still be possible to turn the ribbed V-belt
tension roller by hand.
Install AC compressor – see operation "Compressor, Remove
and Install 25 DT, X 25 DT" in group "D".
|
