Remove transmission - see operation" Automatic Transmission,
Remove and Install (Vehicles with V6 Engines)" in group "K".
Counterhold drive disc with KM-652 (1) and remove from
crankshaft.
Recut crankshaft thread.
Install
Drive disc with new bolts to crankshaft – tightening
torque 65 Nm / 48 lbf. ft. + 30° + 15°. Lock drive disc
when tightening with KM-652 (2).
Install transmission - see operation "Automatic Transmission,
Remove and Install (Vehicles with V6 Engines)" in group "K".
|