Vauxhall Workshop Service and Repair Manuals

Disconnect ground cable from battery.

For X 20 XEV: Disconnect wiring harness plug (2) from intake air temperature sensor.

Remove hose clamps (1) from air intake hose and remove air intake hose from air cleaner housing and from hot film mass air flowmeter.

Remove hose clamp (3) from air intake hose and wiring harness plug (4) from hot film mass air flowmeter.

Remove hot film mass air flowmeter from air intake hose.

  Install

Insert hot film mass air flowmeter in air intake hose – ensure correct seating.

Air intake hose must engage in recess on hot film mass air flowmeter (arrow).

Attach air intake hose (1) to air cleaner housing and to hot film mass air flowmeter – ensure correct seating – tightening torque 3.5 Nm / 2.6 lbf. ft.

For X 20 XEV: Connect wiring harness plug to intake air temperature sensor.

Connect ground cable to battery.