Illustration
1.
|
Air cleaner housing
|
2.
|
Hot film mass air flowmeter
|
3.
|
Air intake hose
|
4.
|
Turbocharger
|
5.
|
Charge air hose
|
6.
|
Intake manifold
|
7.
|
Charge air hose
|
8.
|
Charge air pipe
|
9.
|
Charge air hose
|
10.
|
Intercooler
|
11.
|
Air intake hose
|
|
|
Illustration
Note: Any possible
contamination (grease, oil, etc.) must be cleaned from hoses and
connections prior to assembly.
Strict observance of a torque of 3.5 Nm / 2.6 lbf. ft. must be
ensured when tightening the hose clamps.
Caution
Only if the hose clamps are correctly tightened to the specified
tightening torque, can sealing of the intake system and thereby
operational safety be ensured.
|