Vauxhall Workshop Service and Repair Manuals

No.

TECH 1-DISPLAY

Conditions for Checking

Nominal Value

Trouble Codes

Terminal

36

MAX. FUEL QUANT.

Engine running at idle speed, operating temperature

64

-

Switch off all consumers

19.4 mg / stroke

Actuate accelerator pedal slightly

greater than 19.4 mg/ stroke

Note:

The value given here for the maximum injection quantity applies for engines with the standard setting. If a different value for the maximum injection quantity has been programmed in the relevant TECH 1 adjustment, this parameter value changes: if the injection quantity is lower, it is smaller (down to approx. 17 mg/ stroke), and if the injection quantity is higher, it is greater (up to approx. 21.5 mg/ stroke). Carry out corresponding TECH 1 adjustment (section 5.9.2)

Trouble-shooting

Nominal Value

Cause of Fault:

(If nominal value is not attained)

Trouble-shooting see test step no. 21 DES. FUEL QUANT.

Adjustment see section 5.9 "Table 6, Digital Diesel Electronics DDE 2.1 F6:ADJUSTMENT" test step no. 02 MAX.FUEL Q.OFFS.