|
Affected Terminals: -
Possible Trouble Codes: 61, 64
Engine running at idle speed,
operating temperature
Vehicle stationary
Press key F 6 in the
main menu, select the desired test using the arrow keys and confirm with YES.
Follow the instructions in the TECH 1 display.
Note:
In this adjustment mode, it is
possible to lower / increase the quantity of fuel for starting that is to
be injected by approx. 5 mg / stroke using the arrow keys.
In this adjustment mode,
TECH 1 specifies the previously adjusted injection quantity for
starting to the control unit and the control unit regulates the engine to
this amount.
This mode should be used if the
engine is difficult to start although the preheater system is intact.
|
