vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

F0: DATA LIST - Test Step 14 A/C COMPRESS. SW > < F0: DATA LIST - Test Step 10 HALL SENSOR

F0: DATA LIST

 

No.

TECH 1-Display

Conditions for Checking

Nominal Value

Trouble Codes

Terminal

12

VEHICLE SP. PULSE

Vehicle travelling at approx. 50 km/h (30 MPH)

alternating

RECEIVED

and

NOT RECEIV 12V

-

9, 19

Notes on Trouble - shooting:

Nominal Value:

Cause of Fault:

·   Ignition OFF

·   Disconnect ABS - 2SH control unit U 4.8 and Motronic control unit K 61 from wiring harness

·   Using multimeter, check from ABS - 2SH control unit plug U 4.8 / X 25P / Ter. 6 to control

 

 

     unit K 61 / Ter. 9 for passage

approx. 0 W

·   Short circuit or lead interruption from ABS - 2SH control unit U 4.8 / X 25P / Ter. 6 to control unit  K 61 / Ter. 9

 

 

·     Plug connection X 1 / Ter. 46 defective

·     Plug connection X 3 / Ter. 7 defective

·   Using multimeter, cheek from Motronic control unit plug K 61 /

 

 

     Ter. 19 to ground

approx. 0 W

·     Short circuit or lead interruption from Motronic control unit K 61 / Ter. 19 to ground

·     ABS - 2SH control unit K 95 defective

·     Motronic control unit K 61 defective

 

 

 

 

 

 

 

F0: DATA LIST - Test Step 14 A/C COMPRESS. SW > < F0: DATA LIST - Test Step 10 HALL SENSOR