Note:
The ENGINE LOAD SIG and the TPS LOAD SIGNAL
are prepared throttle valve potentiometer signals.
The only influencing variable
for these signals is the throttle valve signal.
Possible causes of fault:
· Air
leak in intake system
· Mass
air flow meter defective; trouble codes 73, 74
· Engine
speed sensor signal faulty; trouble codes 19, 31
· Lead
connection from throttle valve potentiometer P 34 / Ter. 3 to
control unit K 61 / Ter. 53 interrupted.
· Control
unit K 61 defective
· Lead
connection from control unit K 61 / Ter. 19 to ground
interrupted
|