vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
F7: PROGRAMMING - No. 01 SELECT PROGRAM. INIT. ECU > < F6: ECU ADJUSTMENT - No. 01 SELECT ADJUSTMN. IDLE SPEED

Omega B

Table 7, F7: PROGRAMMING

 

 

Note:

 

If a new control unit is installed in a vehicle, the control unit must be programmed (TECH 1 function F0: RESET). For this, follow the instructions listed below precisely as otherwise the engine idle speed adjustment may be changed beyond the permitted limits.

 

F7: PROGRAMMING - No. 01 SELECT PROGRAM. INIT. ECU > < F6: ECU ADJUSTMENT - No. 01 SELECT ADJUSTMN. IDLE SPEED