Coolant Temperature Sensor, Remove and Install
Remove
If necessary: Remove front windscreen wiper motor – see
operation "Windscreen Wiper Motor, Front, Remove and Install" in
group "N". Remove intake bridge – see operation "Intake
Bridge, Remove and Install". Detach wiring harness plug (1) from
coolant temperature sensor, remove coolant temperature sensor from
coolant bridge – collect coolant.
|
|
Install
Install coolant temperature sensor in coolant bridge –
tightening torque 18 Nm / 13 lbf. ft. Connect wiring harness plug
to coolant temperature sensor. Install intake bridge – see
operation "Intake Bridge, Remove and Install". If removed: Install
windscreen wiper motor – see operation "Windscreen Wiper
Motor, Remove and Install" in group "N".
|