vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Engine Management System M 2.8.1 Trouble Code Table > < Engine Management System M 2.8.1 Circuit Diagram

 

 

Terminal Assignment of Wiring Harness Plug

 

Ter. 1     Ignition signal to ignition coil L 2 / Ter. I

Ter. 2     Ground for Ignition final stages

Ter. 3     Ground pulse, fuel pump relay K 44 / Ter. 86

Ter. 4     Ground pulse, idle speed adjuster M 33

Ter. 5     Ground pulse, controlled canister purge valve Y 34

Ter. 6     Ground pulse, intake manifold solenoid valve 1 Y 46

Ter. 7     Signal lead, hot film mass air flow meter

Ter. 8     Signal lead, camshaft sensor P 47 / Ter. 2

Ter. 9     Signal lead, odometer frequency sensor

Ter. 10   Separate ground for oxygen sensor 112 P 32 / P 36

Ter. 11   Signal lead, knock sensor 1 P 46

Ter. 12   Voltage supply from throttle valve potentiometer P 34, response potentiometer, exhaust gas recirculation valve Y 18

Ter.13    Diagnostic excitation lead Ter. 6 in diagnostic plug XD

Ter. 14   Ground for injector final stages

Ter. 15   Ground pulse for injector cylinder 5

Ter. 16   Ground pulse for injector cylinder 2

Ter. 17   Ground pulse for injector cylinder 1

Ter. 18   Voltage supply for fault memory (permanent positive Ter. 30)

Ter: 19   Ground, electronics

Ter. 20   Ignition signal to Ignition coil L 2 / Ter. 2

Ter. 21   Ignition signal to ignition coil L 2 / Ter. 3

Ter. 22   Ground pulse for engine telltale

Ter. 23   Ground pulse for exhaust gas recirculation valve Y 18

Ter. 24   Ground, final stages, controlled canister purge valve, engine telltale, idle speed adjuster, fuel pump relay

Ter 25    Ground pulse, AC relay 3

Ter. 26   Ground pulse for secondary air pump relay

Ter. 27   Voltage supply, control unit Ter. 15

Ter. 28   Signal lead, oxygen sensor 1 P 32

Ter. 29   Signal lead, knock sensor 2 P 56

Ter: 30   Ground, intake air temperature sensor, coolant temperature sensor, throttle valve potentiometer, hot film mass air flow meter, knock sensor, exhaust gas recirculation response potentiometer

Ter. 31   Ground pulse, intake manifold solenoid valve 2 Y 19

Ter. 32   Output T signal, board computer

Ter. 33   Ground pulse for injector cylinder 6

Ter. 34   Ground pulse for injector cylinder 4

Ter 35    Ground pulse for injector cylinder 3

Ter 36    Unoccupied

Ter. 37   Voltage supply of control unit from injection system relay K 43 / Ter. 87

Ter. 38   Input signal, Traction Control (TC) - injection signal screen

Ter. 39   Unoccupied

Ter. 40   Input signal, AC compressor

Ter. 41   Input, AC readiness switch

Ter. 42   Transmission coding, MT ground

Ter. 43   Signal lead, tachometer

Ter. 44   Signal lead, intake air temperature sensor

Ter. 45   Signal lead, coolant temperature sensor

Ter. 46   Ground pulse, injection system relay K 43 / Ter. 85

Ter. 47   Signal lead, oxygen sensor 2 P 36

Ter. 48   Crankshaft pulse pick - up (ground)

Ter. 49   Crankshaft pulse pick - up (signal)

Ter. 50   Signal lead, exhaust gas recirculation response potentiometer

Ter. 51   Transmission ignition retard load reduction signal from transmission control unit

Ter. 52   Unoccupied

Ter. 53   Signal lead, throttle valve potentiometer P 34 / Ter. 3

Ter. 54   Output signal, throttle valve potentiometer for transmission control unit

Ter. 55   Bidirectional data lead in diagnostic plug XD / Ter. 13

 

 

Object Number: 2387441  Size: DEFAULT

 

 

Note:

 

Modifications relative to the Motronic M 2.8 from the C 25 XE engine in the Vectra / Cavalier / Calibra are printed in bold face.

 

Engine Management System M 2.8.1 Trouble Code Table > < Engine Management System M 2.8.1 Circuit Diagram