Affected Terminals: 19, 31
Possible Trouble Codes: 124,
133, 134
This check can be performed in
two operating conditions: "ignition ON, engine OFF" or
"engine running at idle speed".
The first part of the check
should be performed if the engine cannot be started; otherwise the second
part ensures accurate diagnosis.
Check 1:
Ignition ON
Engine OFF
|
|
Press key F5 in the system
main menu, select the desired test using the arrow keys and confirm with YES.
Follow the instructions in the
TECH 1 display.
|
Intake pipe switchover
valve 2 switches alternately:
ACTIVE 0V
INACTIVE 12V
Noise check:
Clicking noise from intake pipe
switchover valve 2
|
Note:
Intake pipe switchover valve
2 is actuated at a frequency of 0.5 Hz (actuation duration
1 s).
The check is completed after a
maximum of 30 s.
Effects:
Intake pipe switchover valve
2 is located in the intake pipe. At engine speeds above approx.
3300 rpm, it is switched from closed to open.
Check 2:
Engine running at idle speed
|
|
Press key F5 in the system
main menu, select the desired test using the arrow keys and confirm with YES.
Follow the instructions in the
TECH 1 display.
Note:
Intake pipe switchover valve
2 is actuated at a frequency of 0.5 Hz (actuation duration
1 s).
The check is completed after a
maximum of 30 s.
|
Intake pipe switchover
valve 2 switches alternately:
ACTIVE 0V
INACTIVE 12V
Noise check:
Clicking noise from intake pipe
switchover valve 2
The movement of the vacuum valve
piston in the engine compartment is visible.
|