Illustration
1.
|
Air guide hose
|
2.
|
Air cleaner housing
|
3.
|
Air intake hose
|
4.
|
Throttle body
|
5.
|
Hot film mass air flowmeter
|
6.
|
Air intake hose
|
7.
|
Air intake manifold
|
|
|
Note: Any possible
contamination (grease, oil, etc.) must be cleaned from hoses and
connections prior to assembly.
Strict observance of a torque of 3.5 Nm / 2.6 lbf. ft. must be
ensured when tightening the hose clamps.
Caution
Only if the hose clamps are correctly tightened to the specified
tightening torque, can sealing of the intake system and thereby
operational safety be ensured.
|