Conditions for Checking
|
Nominal Value
|
Affected Terminals: 46, 52, 9
|
-
|
Possible Trouble Codes: 56, 57
|
|
Engine running at idle speed
|
|
Engine throttle valve CLOSED
(accelerator pedal in idle position)
|
|
Vehicle stationary
|
|
Press key F8 in the system
main menu, select the desired test using the arrow keys and confirm with YES.
|
|
Follow the instructions in the
TECH 1 display.
|
|
Note:
|
|
In this mode, it is possible to
set the idle speed adjuster to a fixed position using the arrow keys.
|
|
In addition, the YES and NO keys
can be used to display the various data list parameters. The F9 key is
used to store data as in the snapshot mode.
|
|
In this check mode,
TECH 1 specifies the position of the idle speed adjuster. Idle
speed control is no longer active.
|
|
This mode should be used if it
appears necessary to evaluate the various engine parameters (e. g.
O2 INTEGRATOR or INJECTION PULSE) at a fixed idle speed position
(constant air quantity), or to determine whether the idle speed adjuster
travels over the entire movement range evenly and without sticking.
|
|