vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

F2: TROUBLE CODES - Trouble Code 69 INTAKE AIR TEMP. VOLTAGE LOW > < F2: TROUBLE CODES - Trouble Code 56 IDLE AIR CONTROL VOLTAGE HIGH

SIMTEC 56.1          F2: TROUBLE CODE TABLE

 

 

Trouble Code

Information Sensor

Cause of Fault

Remedy in

F0: DATA LIST

No.

Trouble Code Storage when...

57

 

 

IDLE AIR CONTROL

VOLTAGE LOW

 

23, 24, 25

 

 

·   Engine not in operating condition: start

·   Short circuit to ground in circuit to control unit terminal 52

·   Conditions must be fulfilled for at least 0.3 s

·   No fault recognition at a pulse ratio greater than 95.7 %

 

Effects:

·   Oxygen sensor regulation and tank vent valve regulation are blocked

·   All adaptation except throttle valve adaptation is blocked

·   Deceleration fuel cutoff inhibition

·   The controlled canister purge valve is actuated at a minimum value

·   At throttle valve values lower than 12.2', 2 cylinders are switched off for safety reasons.

 

 

 


Related Literature Units
-F0: DATA LIST - Test Step 23 IAC INTEGRATOR
-
-

F2: TROUBLE CODES - Trouble Code 69 INTAKE AIR TEMP. VOLTAGE LOW > < F2: TROUBLE CODES - Trouble Code 56 IDLE AIR CONTROL VOLTAGE HIGH