vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

TABLE 2, TROUBLE CODES - Trouble Code 92 CAMSHAFT SENSOR INCORRECT SIGNAL > < TABLE 2, TROUBLE CODES - Trouble Code 75 TORQUE CONTROL VOLTAGE LOW

Table 2, Trouble Code Table

 

 

Trouble Code

Information Sensor

Cause of Fault

Remedy in

F0: DATA LIST

No.

Trouble Code Storage when

76

CONTINUOUS

TORQUE CONTROL

06, 14

·     Vehicle rolling

·     Duration of load reduction ignition retard longer than 2.5 s

       (duration of load reduction ignition retard too long)

·     Conditions must be fulfilled for at least 3.0 s

 

Effects:

·     Load reduction ignition retard is blocked for 10 s. If the fault occurs for a third time, the load reduction ignition retard is deactivated until "ignition Off".

       If valid load reduction ignition retard occurs before the third attempt, the counter for failed attempts is deleted and the load reduction ignition retard signal is observed again

 

 

 


Related Literature Units
-F0: DATA LIST - Test Step 06 TRANSM. CODING
-

TABLE 2, TROUBLE CODES - Trouble Code 92 CAMSHAFT SENSOR INCORRECT SIGNAL > < TABLE 2, TROUBLE CODES - Trouble Code 75 TORQUE CONTROL VOLTAGE LOW