Omega B
|
TECH 1, Connect to Vehicle
· Ignition Off
· Connect TECH 1 to diagnostic plug X13 (or XD for Omega - B)
The display shows in the relevant language:
· Confirm Opel / Vauxhall 87 - 94 ECU with "Yes" for Astra - F, Vectra / Cavalier, Calibra or
· Confirm Opel / vauxhall Omega - B 1994 ECU with "Yes"
· Enter Model Year with relevant keys
· Select vehicle type via "No" key until correct vehicle type is displayed. Confirm this with "Yes" key (not required for Omega - B)
· Engine off, ignition On
· Confirm QUICK CHECK OF ENGINE, TRANSM. AND ABS - (TC) and SELECT INSTALLED ENGINE? with "Yes"
· Select SIMTEC 56 system via ¯ keys and confirm with "Yes". The following then appears: WAITING FOR DATA ON SIMTEC 56
· Confirm COMPARE OPEL PART - NO XXXXXXXX XX WITH CHART 3 with "Yes" key
· Note trouble codes if any are displayed; confirm with "Yes" until SELECT MODE appears.
· Select FO: DATA LIST with "F0" key
· With the engine at operating temperature, compare all displayed data with nominal values in the Checking Procedures
· If there are deviations from the nominal values, perform trouble - shooting according to instructions
|
