Vauxhall Workshop Service and Repair Manuals

  Remove

Disconnect ground cable from battery.

Detach wiring harness plug (2) from intake air temperature sensor and remove hose clamps (1) from air intake hose.

Remove air intake hose from air cleaner housing and from hot film mass air flowmeter.

Caution

Do not damage components.

Note installation position.

  Remove

Remove intake air temperature sensor (1) carefully from air intake hose.

Caution

Do not damage components.

  Install

Slide intake air temperature sensor (1) into air intake hose. Note installation position – flattened side of intake air temperature sensor (1) must match flattened side (2) of air intake hose.

Fasten air intake hose to air cleaner housing and to hot film mass air flowmeter – ensure correct seating. Air intake hose must engage in recess on hot film mass air flowmeter (arrow).

Connect wiring harness plug to intake air temperature sensor.

Connect ground cable to battery.