vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Diagnostic Information and Procedures > < TC 92/93. Engine only Starts after Repeated Attempts

Omega B

Tank Vent Valve, Remove and Install (X 20 XEV)

  Remove

Disconnect ground cable from battery.

Detach wiring harness plug from tank vent valve (arrow).

 Object Number: 2387860 Size: DEFAULT

Note:   For clearer representation, Illus. E 5400 shows the bracket with the transmission removed.

  Remove

Compress cable holder (1) and pull out of tank vent valve bracket (2) – accessible from vehicle underside. Remove tank vent valve bracket from coolant flange (DIS ignition module adapter).

 Object Number: 2387861 Size: DEFAULT

Note:   When detaching the hoses, ensure that the valve connection is not damaged. Damaged valves must be replaced.

Caution

Damaged valve supports can cause a vehicle fire as a result of leaks.

  Remove

Remove tank vent valve with bracket upwards. Detach hoses (1) and (2) from tank vent valve. Close off hose (2) to activated carbon canister.

  Install

Connect hoses (1) and (2) to tank vent valve.

Attach tank vent valve bracket to coolant flange (DIS ignition module adapter) – tightening torque 8 Nm / 6 lbf. ft.

Fasten cable bracket to tank vent valve bracket. Connect wiring harness plug to tank vent valve. Connect ground cable to battery.

 Object Number: 2387862 Size: DEFAULT

Related Literature Units
-
-

Diagnostic Information and Procedures > < TC 92/93. Engine only Starts after Repeated Attempts