Remove cylinder head – see operation "Cylinder Head,
Remove and Install". Remove camshaft – see operation
"Camshaft and Cam Follower, Remove and Install (Cylinder Head
Removed)".
Remove tank vent valve (1) from camshaft housing. Detach wiring
harness bracket (2) from camshaft housing.
Install
Attach tank vent valve to camshaft housing – tightening
torque 10 Nm / 7.5 lbf. ft.
Attach wiring harness bracket to camshaft housing –
tightening torque 15 Nm / 11 lbf. ft.
|