|
Mark running direction of ribbed V-belt. Tension ribbed V-belt
tension roller in direction of arrow (clockwise) with KM-913-A and
insert retaining pin (1) in apertures provided – remove
ribbed V-belt.
Ribbed V-belt tension roller from auxiliary aggregates
support.
Install
Attach ribbed V-belt tension roller with retaining pin to
auxiliary aggregates support using fastening bolts (2) –
tightening torque 25 Nm / 18.5 lbf. ft.
Install ribbed V-belt – tension ribbed V-belt tension
roller using KM-913-A and remove retaining pin, release ribbed
V-belt tension roller. Note running direction of ribbed V-belt.
|
