Anti - theft Warning System ATWS Quick Check F5: ACTUATOR TEST
HORN
Conditions for Checking
Nominal Value
Affected Terminals: 36
Possible Trouble Codes: 25
Ignition ON
Press F5 in the system main menu. Follow the instructions in the TECH 1 display.
Start Actuator Test
TECH 1 display:
alternating
INACTIVE 12V
and
ACTIVE 0V
Acoustic signal
(horn) active
Note:
The horn is actuated at a frequency of 0.8 Hz (switch - on time 0.2 s).
The test is completed after a maximum of 5 cycles.