vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

CDLS, F0: DATA LIST - Test Step 07 DRIVER DOOR ST. > < CDLS, F0: DATA LIST - Test Step 05 CO-DR. LOCK SW.

CDLS, F0:DATA LIST

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

No.

TECH 1 Display

Conditions for Checking

Nominal Value

Trouble Codes

Terminal

06

CO-DR. UNLOCK SW

Ignition OFF

All doors closed

 

 

 

-

12

 

 

Turn key 30° to the right in co-driver's door (unlock central locking)

 

 

CLOSED   0V

 

 

 

 

 

Turn key 30° to the left in co-driver's door (lock central locking)

 

 

OPEN    12V

 

 

 

 

Turn key 30° to the right in co-driver's door (unlock central locking)

 

 

 

 

Notes on Trouble-shooting:

Nominal Value:

Cause of Fault:

(If nominal value is not attained)

 

·   Release and disconnect wiring harness plug, body and co-driver's door X12

OPEN     12V

·   Body wiring harness, short circuit to ground

     from:    K37/Ter. 12

     to:         X12/Ter. 1

 

 

·   Control unit K37 defective

 

 

·   Connect wiring harness plug X12/Ter. 1 in body wiring harness to ground

CLOSED    0V

·   Body wiring harness, interruption

     from:    K37/Ter. 12

     to:         X12/Ter. 1

 

 

·   Control unit K37 defective

 

 

·   Connect wiring harness plug, body and co-driver's door X12 again

 

 

·   Release and disconnect wiring harness plug S42

 

 

·   Connect wiring harness plug S42/Ter. 3 in front door wiring harness to ground

CLOSED   0V

 

·   Front door wiring harness, interruption

     from:    X12/Ter. 1

     to:         S42/Ter. 3

 

 

If nominal values are attained:

 

·   Switch S42 defective

 

 

 

 

CDLS, F0: DATA LIST - Test Step 07 DRIVER DOOR ST. > < CDLS, F0: DATA LIST - Test Step 05 CO-DR. LOCK SW.