No.
|
TECH 1 Display
|
Conditions for Checking
|
Nominal Value
|
Trouble Codes
|
Terminal
|
10 |
ALL DOOR SWITCH
|
Ignition
OFF
|
|
-
|
17
|
|
|
All
doors closed
|
OPEN
|
|
|
|
|
One
door open
Note
:
The
TECH 1 display shows the condition of the door contact switch.
ALL DOOR SWITCH CLOSED means:
Switch
closed = 0 volts, one door open
|
CLOSED 0V
|
|
|
Notes
on Trouble-shooting: |
Nominal
Value:
|
Cause
of Fault:
(If
nominal value is not attained)
|
· Release and disconnect wiring harness plug
K37 from CDLS control unit |
|
|
· All doors closed |
Door
lamps OFF
|
· Body wiring harness, short circuit to ground
from: K37/Ter. 17
to: S47
· Trouble-shooting of vehicle electronics in area of door contact
switches S47, S17, S31, S32.
· Control unit for anti-theft warning system / immobiliser defective
|
· Using multimeter, measure voltage |
greater
than 9 volts
|
· Body wiring harness, interruption
from: K37/Ter. 17
to: S47
|
· Open one door |
Door
lamps ON
|
· Trouble-shooting of vehicle electronics in area of door contact
switches S47, S17, S31, S32.
|
· Using multimeter, measure voltage |
approx.
0 volts
|
· Body wiring harness, interruption
from: K37/Ter. 17
to: S47
|
If nominal values are attained: |
|
· Control unit K37 defective
|
|
|
|
|
|
|
|