Vauxhall Workshop Service and Repair Manuals > Omega B > N Electrical Equipment and Instruments | Central Door Locking System | Diagnostic Information and Procedures | Diagnostic Procedures | CDLS, F0: DATA LIST

CDLS, F0:DATA LIST

· Check status of co-driver's door in test step 8

No.	TECH 1 Display	Conditions for Checking	Nominal Value	Trouble Codes	Terminal
17
LOCK OPERATION	Ignition OFF All doors closed		-	24, 25
		Turn key 30° to the left in driver's door (unlock central locking)	INACTIVE
		Turn key 30° to the right in driver's door (lock central locking)	briefly LOCK then INACTIVE again
		Turn key 60° to the right in driver's door (switch on anti-theft device)	briefly LOCK then INACTIVE again
		Turn key 30° to the left in driver's door (unlock central locking)	briefly LOCK then INACTIVE again

	Note: The TECH 1 indicates LOCK or UNLOCK , for the duration of the servo motors' actuation.
Notes on Trouble-shooting:
Nominal Value:	Cause of Fault: (If nominal value is not attained)
· Check status of driver's door in test step 7

If nominal values are attained:
	· Control unit K37 defective

Vauxhall Workshop Service and Repair Manuals