vauxhall Workshop Repair Guides

Vauxhall Workshop Manuals

< PREV PAGE NEXT PAGE >

Electronic Control Unit, Program

The electronic control unit for each individual window winder must be programmed after

  • Reconnecting battery or replacing fuses
  • reconnecting window winder to vehicle electrical system.

Programming: Close all doors, ignition ON. Fully close all windows in turn by constantly pressing the tip switch. Keep the tip switch pressed down for at least 2 seconds after each window has fully closed.


Related Literature Units
-
-

N Electrical Equipment and Instruments > Electrical Window Winders > Repair Instructions > Electronic Control Unit, Program Window Winders

< PREV PAGE NEXT PAGE >