vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Special Program Module for Omega-B "Opel/Vauxhall 94 Omega-B ECU" > < Terminal Assignment of 26-pin Wiring Harness Plug

Trouble Code Table

 

The MID is equipped with automatic self - diagnosis.

Faults which occur in the MID itself or in the sensors (periphery) of the system are stored in a fault memory (EEPROM, non - volatile data memory) and can be read out using the TECH 1 tester.

 

If a fault occurs, an "F" is displayed on the left of the clock hours display.

 

Trouble Code

Meaning

24

Odometer sensor signal faulty

42

AT control

51

EEPROM defective

52

EEPROM not programmed

55

Control unit defective

81

Serial Data Line (SDA), short circuit to ground

82

Serial Clock Line (SCL), short circuit to ground

83

Master Request Line (MRQ), short circuit to ground

84

SDA, open lead or short circuit to battery voltage

85

SCL, open lead or short circuit to battery voltage

86

MRQ, open lead or short circuit to battery voltage

87

SDA / SCL short circuit

88

SDA / MRQ short circuit

89

SCL / MRQ short circuit

91

SDA / SCL leads mixed up

92

SCL / MRQ leads mixed up

93

Radio internal fault

94

SDA / SCL / MRQ data comparison fault

95

SDA / SCL / MRQ interruption during data transfer (radio / MID) Loose contact

96

SDA / MRQ leads mixed up

121

Radio fault active

167

Fuel reserve sensor: short circuit to ground

168

Fuel reserve sensor: short circuit to battery voltage

169

Ambient temperature sensor: short circuit to ground

171

Ambient temperature sensor: short circuit to battery voltage

173

Fuel consumption signal: short circuit to ground

 

 

Special Program Module for Omega-B "Opel/Vauxhall 94 Omega-B ECU" > < Terminal Assignment of 26-pin Wiring Harness Plug