Adjustment:
Time and date can be adjusted using the two keys above the
TID.
If the mode key (left key) is pressed for longer than
2 sec., the setting mode is activated (time display flashes).
Pressing the mode key again will advance the display to
minutes, day, month and year.
Pressing the setting key (right key) briefly increases the
relevant display entry.
The adjustment scrolls on automatically when he setting key
is held down in the setting mode.
Adjustment is completed when all adjustment positions have
been run through and the display no longer flashes.
If, when in the setting mode, the setting key is not
actuated within 2 minutes, or the ignition is interrupted, the setting
mode is likewise completed.
After a current interruption or when the battery voltage
was too low, the time and date must be reset.
When the battery is connected, the time and date display
goes automatically into the setting mode for two minutes.
|