Affected terminals in TID
wiring harness plug: 8, 9, 10, 11
Possible trouble codes: 121
Ignition ON
Radio OFF
Press key F5 in the system main
menu. Follow the instructions in TECH 1.
Start actuator test
Note:
If the instructions in the TECH
1 display are not followed precisely, the diagnosis may be incorrect.
When the radio is switched on,
a self-test of the radio display bus is performed automatically. In this
self-test, the radio unit sends certain signals via the radio display bus to
the TID. TECH 1 reads the signals from TID and evaluates them.
If the display on the right
does not appear in the TECH 1 display, TECH 1 indicates the exact fault and
the fault location. The abbreviations have the following meanings:
SCL Serial Clock Line;
Ter. 9
MRQ Master Request Line;
Ter. 10
SDA Serial Data Line; Ter.
11
|