Assembly, Signal Switch with Control Switch for Electronic Cruise Control, Replace
 Remove, Disconnect Turn steering wheel by 90 ° . Remove upper and lower signal switch panelling, removing blind plugs on left and right (1), unscrew bolts (2). Remove lower signal switch panelling, unscrew 3 bolts (3). | 
|
Remove, Disconnect Release assembly, signal switch with control switch for electronic cruise control, and remove from bracket on steering column. | 
|
Release wiring harness plug from signal switch and wiring harness plug to instrument panel wiring harness and disconnect.
 Install, Connect Connect wiring harness plugs, clip control switch into holder. Attach upper and lower signal switch panelling. | 
|
|
