Vauxhall Workshop Service and Repair Manuals

No.

TECH 1 Display

Conditions for Checking

Nominal Value

Trouble Codes

Terminal

1

DRIVER MIR. H.

Ignition ON

Press key F5 in the system main menu, select the desired test with the arrow keys and confirm with YES. Follow the instructions in the TECH 1 display.

18

4, 5, 10, 13, 21

(26-pin plug)

When the YES key is actuated again, the driver's mirror can be moved to the two end stops using the arrow keys. After an arrow key is pressed, the driver's mirror is moved in the corresponding direction (arrow key UP -> left; arrow key DOWN -> right).

The value displayed alters continually within the specified range depending on the programmed end stops.

13 %         0.14 V

to

94 %         4.67 V

Driver's mirror moves in horizontal direction

Notes on Trouble-shooting:

Nominal Value:

Cause of fault:

(If nominal value is not attained)

·   Carry out test steps 23 and 24 in F0:DATA LIST