Beetle L4-1.9L DSL Turbo (ALH) (1998)
^
Remove covers -1- and remove screws -2-.
^
Remove switch mounting -3- from bracket.
^
Remove screws (arrows).
^
Remove glove box -1-.
^
Disconnect connector for glove box light.
Radio, removing
Tip:
To remove the radio, release tool 3344A is required.
^
Slide radio release tool 3344A into release slots (arrows) until they engage.
^
Pull radio out of instrument panel using grip rings of release tools.
Tip:
The radio release tool 3344A must not be pushed to the side or tilted.
To remove the release tools from the radio the locating lugs on the side of the radio must be pressed inward.
Antenna cable, installing