Beetle L4-1.9L DSL Turbo (ALH) (1998)
^
Continue cable routing down the -A- pillar next to instrument panel as shown.
^
Continue antenna cable routing along lower -A- pillar to air distribution housing as shown (white dashes show general routing).
^
Route antenna cable behind glove compartment (white dashes show general routing).
^
Fasten to air distribution housing with 100 mm adhesive backed felt strips, cut from Part No: 533867910A at -arrows- (strips shown are white for
clarification only).
^
Route antenna cable through impact absorber -arrow- to radio opening (white dashes show general routing).
^
Clip old antenna cable near the tape wrap of the wire harness at the instrument panel and at the antenna.
^
Connect antenna cable to radio, ensure that when radio is installed any excess cable will not interfere or rattle (use left over adhesive backed felt strip
as necessary).