Beetle L4-1.9L DSL Turbo (ALH) (1998)
-
Turn wheel hub and measure distance between rotor and speed sensor, dimension -a-, all around.
^
dimension -a- = 0.3 mm (0.0118 inch)
-
If rotor is not true, remove wheel hub with rotor and replace. Refer to Transmission and Drivetrain.
Front Wheel Speed Sensor Wiring, Removing And Installing
Required Special Tools
^
VAS 1978 wiring repair kit
Removing:
-
Obtain radio code on vehicles with coded radio.
-
Disconnect battery.
-
Pull off intake hose -1- and connector -2- from Mass Air Flow (MAF sensor.
-
Remove bolts -4- and -5-.
-
Remove air cleaner unit. Refer to Powertrain Management.
-
Remove connector from ABS Control Module (arrow -1-) and pull off (arrow -2-).