Beetle L4-1.9L DSL Turbo (ALH) (1998)
Brake Pedal Assy: Service and Repair
Removing and Installing
Brake Pedal, Removing And Installing
Removing
-
Remove trim below instrument panel.
-
Remove screws -1-.
-
Remove cover -A-.
-
Remove connecting plate between clutch and brake pedals (manual transmission)
-
Remove brake light switch.
-
Disconnect accelerator cable.
-
On vehicles with accelerator pedal position sensor, release connector below instrument panel.
-
Disconnect brake pedal from brake booster. See: Brake Pedal to Brake Booster, Disconnecting and Connecting
-
Remove nuts.
-
Remove pedal cluster.
-
Remove brake pedal.
Installing
Install in reverse order of removal.
-
Adjust brake light switch. Refer to Lighting and Horns.