Beetle L4-1.9L DSL Turbo (ALH) (1998)
-
Clean brake caliper housing, especially bonding surface for brake pad. Surfaces must be free of adhesive or grease residue.
Installing
WARNING!
^
Brake fluid is poisonous. Never siphon brake fluid by mouth.
CAUTION!
^
Extract some of the brake fluid from the brake fluid reservoir before pushing the pistons back.
^ A full brake fluid reservoir may allow brake fluid to flow out and cause damage when pistons are pushed back.
^ Use the bleeder bottle or plastic bottle which is used only for brake fluid.
Brake pads with specified direction of rotation
1. Right-hand piston side brake pad
2. Left-hand piston side brake pad
-
Press piston back.
-
Insert brake pads.
CAUTION!
^
When installed, it is important that the arrow on the brake pad backing plate -A- points downward.
-
Install outer brake pad in brake caliper
-
Pull protective foil off outer brake pad back plate.