Beetle L4-1.9L DSL Turbo (ALH) (1998)
2. Push rod
3. Retaining tabs
-
Insert special tool T 10006 and pull in direction of driver's seat while counter-holding on brake pedal -1-.
Note:
^
Do not allow the brake pedal to move backward.
^
The special tool presses the push rod ball head off the retaining tabs.
^
The illustration shows the pedal cluster removed.
-
Pull special tool T 10006 and brake pedal toward driver's seat.
Note:
^
The brake pedal will now be pulled off the push rod ball head.
Connecting
-
Hold push rod ball head in front of mounting and push brake pedal in direction of brake booster.
^
Push rod ball must be heard to snap into place
Continue installation in reverse order of removal.
-
Adjust brake light switch. Refer to Lighting and Horns.