Beetle L4-1.9L DSL Turbo (ALH) (1998)
Water Pump: Service and Repair
Coolant pump, removing and installing
Special tools and equipment
^
VAG 1306 Drip tray for VAG 1202A
^
VAG 1331 Torque wrench: 5 to 50 Nm (3.7 to 37 ft. lbs.)
^
VAG 1921 Hose clip pliers
^
Anti-freeze tester
Removing
Note:
^
Always replace seals and gaskets.
^
Lower part of the toothed belt guard need not be removed.
^
Toothed belt should be left in position on the crankshaft sprocket.
^
Cover toothed belt with a cloth to protect it from coolant before removing coolant pump.
-
Drain coolant
-
Remove ribbed belt
-
Disconnect fuel supply and return lines at fuel filter.
-
Remove connector hose between charge air cooler and intake manifold
-
Remove fuel filter with bracket
-
Remove belt guard upper and middle sections
-
Remove V-belt from camshaft sprocket, injection pump sprocket and coolant pump sprocket