Beetle L4-19L DSL Turbo: Harmonic Balancer Specifications
Harmonic Balancer - Crankshaft Pulley: Specifications
Tightening Specifications
Belt Pulley/Vibration Damper ................................................................................................................. 10 Nm (7 ft. lbs.) plus additional 1/4 turn (90°)
Note: Can only be installed in one position; holes are off-set
Crankshaft Toothed Belt Sprocket Bolt ............................................................................................... 120 Nm (88 ft. lbs.) plus additional 1/4 turn (90°)
Note:
^
Always replace Crankshaft Toothed Belt Sprocket Bolt
^
To loosen and tighten, counter-hold with 3099
^
Threads and shoulder must be free of oil and grease
^
The additional quarter turn can be obtained in several stages.