Beetle L4-1.9L DSL Turbo (ALH) (1998)
Valve Guide: Service and Repair
Valve guides, replacing
Special tools and equipment
^
3121 Drift
^
3120 Reamer and cutting fluid
Removing
-
Clean and check cylinder head.
Note: Do not replace the valve guides in cylinder heads where the valve seats can no longer be reworked, or cylinder heads which have already
been machined to the minimum dimension.
-
Press out worn valve guides using 3121 from camshaft side (valve guides with shoulder -service version - from combustion chamber side).
Installing
-
Press new guides in up to shoulder (moistened with oil) from camshaft side in cold cylinder head using 3121 drift.
Note: When the valve guide shoulder makes contact, do NOT allow the pressure to exceed 2000 psi or shoulder could break off.
-
Ream out guides with 3120 hand reamer and plenty of cutting fluid.
-
Rework valve seats, Refer to Valve Seat, Service and Repair